- This is a picture of a quipu (or khipu), a record-keeping tool used by the Incas.
Quipus are knotted cords that were used in the Incan Empire for record-keeping and narrative-telling. There are about 400 quipus known in existence today. Knowledge about quipus is limited to the descriptions given by early Spanish writers and what can be discovered by analyzing the relatively small sample held in museums and private collections. Because of the limited amount of information available, there are still many questions about what exactly quipus were used for. It is clear that they were used for record keeping, and there are also indications that they were used in the recounting of fictional and historical narratives, but experts and sources differ as to whether they constituted a full writing system or simply acted as a memory aide. Either way, it is clear that quipus were a method of recording and working with numbers, and their existence demonstrates that the Incas had relatively advanced mathematical knowledge.
Terminology and Construction
Smaurer1 Now that I understand the importance of this section for introducing terminology that must be understood as defined terms in order to follow the rest of the article properly, I feel that it cannot be hidden and proper formatting for introduction of definitions should be used.
Modern writers about quipus use a common terminology, which is introduced here and used in what follows.
Quipus are made from cotton or wool cords, all of which are at least two-ply and have a loop on one end and a knot on the other. They are composed of a thick main cord, thinner pendant cords and top cords, which are looped onto the main cord; and subsidiary cords, which are looped onto pendants and top cords. It is also possible for subsidiary cords to have their own subsidiaries. There are also dangle cords, which are attached to the loop end of the main cord. Diagrams of the methods of attaching cords are shown below:
There is no way of knowing for sure which way the Incas oriented their quipus, but it is conventional today to orient the main cord horizontally and all other cords vertically. Because one end of every cord is looped and the other is knotted, it is also conventional is to consider the loop end to be the start and the knot to be the end. Pendant cords are down hanging down; thus their end is at the bottom. Top cords go up.
When looking at quipus, you can see that cord color, the spacing of cords and knots, and the number and type of knots all vary, as shown in Image 1. It can therefore be concluded that all these elements contribute to the meaning of the quipu.
Note: This topic's "More Mathematical" explanation actually involves very little mathematics.
A More Mathematical Explanation
The information in this section is drawn primarily from the excellent book Mathematics of the Incas [...]
The information in this section is drawn primarily from the excellent book Mathematics of the Incas, which is based upon data taken from studying nearly 200 different quipus.
The knots on the cords represent numbers. Quipus record numbers using a base-ten positional system. This is essentially the same as the number system we use, which is actually quite remarkable. Many civilizations never developed a true number-positional system on their own, and for those that did, the use of base-ten is not a given.
A positional system is a way of recording numbers with a small library of symbols. In such a system, the value of a group of symbols depends solely on the symbols' positions. For example, the symbol 6 has a different value when it appears in 625 than in 2,036; but it has the same value in 625 and 699. Contrast this with Roman Numerals, where the value of a symbol is dependent on the symbol's position and on what sorts of symbols appear around it. In other words, the symbol V means something different in VI than in VL (VI means 5+1, but VL means 50-5).
Positional systems have an advantage over other numerical systems because they make basic arithmetic much simpler. Imagine trying to do long division with Roman Numerals or tally marks - it's nearly impossible to do without translating the numbers into a positional system. Although the idea of doing arithmetic with knots and string may seem strange, it's certainly easier than attempting the same with Roman Numerals. The fact that quipus use a positional system is strong evidence that the Incas were familiar with arithmetic.
On the other hand, there is nothing special about base-ten that makes it inherently better than any other base. Base-ten means that a number system's library consists of ten symbols. Ours are the digits 0, 1, 2, 3, 4, 5, 6, 7, 8, and 9, and the Incas' symbols were groups of knots (as described below). People often say that our number system is base-ten because it evolved from counting on our ten fingers, but this doesn't mean that ten is the most "natural" base.
Even cultures that never developed a written or recorded number system show evidence of a base system in their number words. In English, words like "fourteen" ("four" + "ten") show that our language evolved around base-ten. Many cultures have similar linguistic markers, but for different bases, and this often corresponds to a different method of counting on their hands. Some cultures count the thumb-tip and the thumb-joint separately, and arrive at a base-six or base-twelve counting system. Others skip the thumb entirely, or count the spaces between fingers instead of the fingers themselves, and wind up with a base-four or base-eight system. Some cultures don't count on their hands at all, and count instead by a series of body parts - they may end up with a system that counts up to thirty-something before cycling back (see the interesting video here for more).
So, it's actually quite surprising that the Incas had an advanced number system, and even more so that it should be so nearly analogous to our own! Because of this, the numbers on quipu are pretty simple for us to learn to read.
As you move from the end of a pendant cord towards the main cord, each successive group of knots represents one higher power of ten. So a cord that has five knots at the top, then three, then two, then eight at the bottom represents the number that is commonly written as 5,328. Most of the time, numbers are represented using single knots (illustrated in Image 2), where the number of knots in the cluster corresponds with the digit in that place. In the units place, however, different types of knots are used. Long knots are used for units values of 2-9, where the number of turns represents the value of the units digit. A figure-eight knot is used for a units value of one.
In Image 3, cords are represented as lines, and knots are represented by a number and a letter (eg 4S means four single knots). In this quipu diagram, three different colors are used, and the values represented are 84, 321, and 9.
It is important to note that the units place on one cord lines up with the units place on the next (and the same with the other places). Because of this, an empty space can be left to indicate a value of zero. So the number 1,003 would be represented by one single knot near the top of the pendant, a large space corresponding with the empty hundreds and tens places, and a 3-turn long knot at the bottom of the cord.
This interpretation of quipus was first proposed by Leland L. Locke at the beginning of the 1900s. It is believed that this is the correct interpretation because with it, the values on the top cords of many quipus are the sum of the values on the associated pendants, a pattern that shows so consistently that it must be intentional.
Cross-Categorization and Hierarchical Organization
The spacing of the cords groups certain classes of information together. When combined with color distinctions, spacing can be used to create complex cross-categorization. Use and placement of subsidiaries can be used to organize hierarchical information. This means that the information represented in a quipu often has relationships that we might represent by a chart/spreadsheet, or a tree diagram.
A quipu that is easily translatable to a chart is typically composed of several distinct groups of pendant cords, where each group of cords corresponds to a column in the chart, and each cord within the group corresponds to a specific element within that column. The order and color of the cords in the group tells you which row the element goes in. For example, if a quipu consists of three groups of pendants, and each group contains six different colored strings, it can be represented as a chart with three columns and six rows. We can label both the quipu diagram and the chart as a series of elements of the form , where i=1,2,3,4,5,6 and j=1,2,3 :
Of course, we can also construct the table the other way, with rows representing cord groups and columns representing placement and color:
In some cases, more complicated quipus take the form , where there are i related charts, each with j columns and k rows.
Quipus can also represent hierarchical information, usually through the use of subsidiaries. The overall description of these quipus is not a plain chart, but a tree diagram, or a chart where some of the elements are tree diagrams. This type of quipu is well-suited to record things like organizational structure or a series of successive choices - information that involves several levels and where each data point has no more than one connection on the level higher than it.
In the example below, the quipu and tree diagram could be used to display the different pricing options of a three-stage journey. Let's say a traveler needs to get from City 1 to City 4 by way of City 2 and City 3. The traveler is trying to choose between taking the train and taking the bus for each stage of the trip, and there are no buses from City 3 to City 4. The diagrams below show the structure of the options available to the traveler, and the prices for each option could additionally be shown by adding numbers to the images.
Some of these hierarchical quipus have subsidiary structures that are consistent and repetitive, demonstrating rhythm, symmetry, and variations on themes. Some scholars believe that quipu that demonstrate these patterns use number labels as memory aides in narrative recounting.
Interpreting a Sample Quipu
This section discusses a modern-day quipu that encodes information modified from Excerise 5.2 in Mathematics of the Incas. The quipu is shown below:
Ignoring the dangle cord for now, the quipu has four groups, containing four, four, three, and four pendant cords, respectively. There are four colors of pendant cords used, one in each group, except for the third group, which is missing a purple cord. This quipu can be described as the set of elements , where i represents the groups and j represents the pendant colors, and i=1,2,3,4 and j=1,2,3,4. The information can then be organized into the chart seen in Image 5.
Several patterns can be seen. First, all of the fourth column entries are the sum of the preceding entries in that row. Second, when accounting for the fact that only integer values can be represented, all entries are multiples of twelve, and no entries are fewer than twelve. Finally, it is now easy to see that 242, the value of the dangle cord, is the sum of the entries in the fourth column.
If this were a real quipu, there would be little else to do with it, other than conclude that this quipu, like many others, demonstrates the type of data patterns that are the result of careful planning and not chance. Since this is only a sample quipu, however, the information it encodes is known, and can be used to give meaning to the numbers.
This example is designed to illustrate the results of the distribution of 242 ears of corn among four families. The rule for distribution is that each member of the community gets an equal share of corn, but because no ear is to be broken into pieces, the remainder is split between the two eldest people.
The four families consist of a man, a woman, the man’s two parents, and two children; a man, a woman, the woman’s sister, and four children; a man and a woman; and a man, a woman and three children. Each pendant color represents a family. The first group represents the ears of corn given to men, the second group represents the ears of corn given to women, and the third group represents the ears of corn given to children.
Since there are twenty people in the village, the 242 ears of corn divide into 12 ears each with two left over. The blue cord in the first group has a value of 12 because it represents the 12 ears of corn given to the father in the second family. The green cord in the third group has a value of 36 because it represents the 12 ears of corn given to each of the three children in the fourth family. The two extra ears of corn go to the grandparents in the first family, which is why the red pendants in the first two groups show a value of 25 instead of 24. There is no purple pendant in the third group because the third family has no children. The fourth group totals the corn given to each family as a whole, and the dangle cord records the total ears of corn distributed.
Why It's Interesting
Quipus are important because their existence "dispels the notion that mathematics flourishes only after a civilization has developed writing". Through quipus, the Incas were able to do arithmetic, and keep incredibly complex records - some quipus are made of hundreds of cords! - tasks which most people assume can only be effectively done in literate societies.
When interpreted as discussed in A More Mathematical Explanation, the data found in quipus is very regular. Most quipus show evidence of summation (or of subtraction), and there are often consistent ratios between related categories. These patterns convince scholars that the Inca weren’t recording random statistics, like the number of days it rained in a certain village, but data that was the result of carefully planned actions, such as the distribution of food from storehouses.
All of the numbers found on quipus are necessarily integers, but there is evidence that the Inca had the arithmetical concept of multiplication/division as well as addition/subtraction. Just as many cords or charts contain the sums of information found in other cords or charts, so do many cords contain evidence of numbers being divided into equal parts (or as equal as possible when only integers can be used).
There is strong evidence that quipus were also used by Incan storytellers and historians, but there is disagreement as to whether quipu can be said to constitute a writing system. Some experts have said that quipu are just as much a writing system as cuneiform was in its early years, when it was only used for political arithmetic and record keeping, but that it is unlikely that narrative quipu contained anything beyond numeric labels that assisted in memory recall.
Other scholars have demonstrated that there are Spanish records telling of the existence of "Royal Quipu", which supposedly formed a syllabic system capable of recording language, but these Spanish sources might not be reliable . Perhaps the best answer is given by Gary Urton, in his article “Recording Signs in Narrative-Accounting Khipu”, where he concludes that so far, all that is known for certain is that narrative quipus don’t fit the pattern of record-keeping quipu, and that scholars should keep their minds open to an interpretation based on “the syntactic, semantic, and overall grammatical properties of Quechua”. In other words, narrative quipus are still not fully understood, and so it is possible that they do, in fact, constitute a full writing system.
- There are currently no teaching materials for this page. Add teaching materials.
- Ascher, M., & Ascher, R. (1981). Mathematics of the incas: code of the quipu. Mineola, NY: Dover.
- Quilter, J., & Urton, G. (Eds.). (2002). Narrative threads: accounting and recounting in andean khipu. Austin: University of Texas Press.
- Pickover, C. A. (2009). The math book. China: Sterling.
This page was originally adapted from a paper written by Katherine Derosier
Leave a message on the discussion page by clicking the 'discussion' tab at the top of this image page.