- When a light source illuminates the inner surface of a metal ring, the resulting shape is a cardioid formed by light rays.
- 1 Basic Description
- 2 A More Mathematical Explanation
- 3 Why It's Interesting
- 4 Image Gallery
- 5 Teaching Materials
- 6 Future Directions for this Page
In geometry, the cardioid is defined by the path of a point on the circumference of a circle of radius that is rolling without slipping on another circle of radius . Its name is derived from Greek work kardioedides for heart-shaped, where kardia means heart and eidos means shape, though it is actually shaped more like the outline of the cross section of an apple.
The cardioid was first studied by Ole Christensen Roemer in 1674 in an effort to try to find the best design for gear teeth. However, the curve was not given its name until an Italian mathematician, Johann Castillon, used it in a paper in 1741.
, and a special case of a Limacon of Pascal, it is believed that it could have originated from Etiene Pascal's studies.
A More Mathematical Explanation
Generating a Cardioid Using Other Shapes
A cardioid can be formed by a set of circles:
- Draw a fixed base circle, C, and a point, P, on the circumference of the circle.
- Pick any point on C and mark it with a blue dot.
- Draw a circle whose center is at C, and passes through P.
Repeat 2 and 3 for many points on C, and you will generate a set of circles, shown in the image below. There is only one curve that is tangent to every circle in the set, and it is a cardioid shown in pink, E.
The process of deriving a new curve from a given set of curves in this manner is called taking the envelope of those curves. This image shows intermediate steps in the process of drawing the set of circles. As more circles are added, it becomes more clear that the envelope is a cardioid.
To draw circles and see how they form a cardioid, drag the red dot around the circle below:
To generate a new cardioid from an existing cardioid, we can take the following steps:
- We begin with a cardioid, C, and draw circles tangent to C.
- Mark the center point of each circle tangent to C.
Once many tangents circles are marked, we can see that their center points will form a smaller, mirror image cardioid, E.
The process of drawing circles tangent to a curve and marking their midpoints is called taking the evolute of a curve.
A cardioid can also be constructed using a circle and a light source using the following steps:
- Begin with a circle, C, made of material that reflects light.
- Place it on a diffuse surface, like a table top.
- Pick a point, P, on the circumference of the circle.
- Fix a light source at P, so that light rays hit the inside of the circle.
Light rays will be reflected off the circle in many directions, and the envelope of these rays will be a cardioid.
The process of reflecting light off a curve so that light rays form a new shape is called generating the caustic of a curve. A cardioid can be produced in this manner because a cardioid is the caustic of a circle when the light source is located on the circle itself.
To generate a cardioid using a circle, we can perform the following:
- Start with a circle, C, with diameter, d.
- Mark a fixed point on the circle, P.
- Draw line segments of length 2d that cross P and have a midpoint on the circle.
As more line segments are added to the figure, the resulting cardioid becomes apparent.
This process is called taking the conchoid of a circle. When the fixed point is located on the circle itself and the length is twice the diameter of the circle, the conchoid will be a cardioid with a diameter twice the original circle's diameter.
A cardioid can be generated circle by performing the following:
- Start with a circle, C, and fix a point, O on the circumference.
- Choose another point, P, on the circumference.
- Draw a line that is tangent to C at point P.
- Mark a point, Q, on this tangent line such that PQ and OQ are perpendicular.
If we repeat steps 2-4 for every point on the parabola, a cardioid will result.
This process is called taking the pedal of a circle with respect to a fixed point on the circle.
A cardioid can be produced from a parabola using the following steps:
- Begin with a parabola, C, with a focus at a point, O.
- Draw a fixed circle with a center at O and a radius k.
- Pick a point, Q, on the parabola and extend a line that crosses O and Q.
- Mark a point, P, so that P is located on the line OQ and satisfies the equation .
If we repeat this process for the other points on the parabola, the new curve that will result is a cardioid.
This procedure gives us the inverse of a parabola with respect to its focus. The cusp of the resulting cardioid will lie at the center of the circle.
Equations for a Cardioid
When is the radius of the moving circle, the Cardioid curve is given by:
Why It's Interesting
One popular type of microphone is the cardioid microphone. The cardioid microphone is not shaped like a cardioid. In fact, it is so named because the sound pick-up pattern is roughly heart shaped.
The image on the left shows a cardioid microphone's polar pattern, which indicates how sensitive it is to sounds arriving at different angles. This image should be interpreted as follows:
- Each point on the black cardioid corresponds to a combination of an angle at which the sound enters the microphone and a volume of sound being input.
- Each point along this cardioid will produce the same sound level output of the microphone's speakers.
You might notice that a sound being picked up from the top of the microphone (at 0°) can be input at almost 0 decibels and still produce the same volume as if a sound that was 6 decibels louder was picked up from the side of the microphone (at 90°). If you are not familiar with the decibel scale used for sound, this may not seem particularly noteworthy, However, this is the same as saying if two persons were speaking equidistant from the microphone, one directly at 0° and the other 90°, the person at 90° would sound as if he were twice as far from the microphone as the person at the front.
The ability of cardioid microphones to pick up only the desired sound, while minimizing ambient noise, makes this type of microphone especially useful for live performances. In these situations, a cardioid microphone can deliver clearer sound even when there are a variety of loud sounds nearby. Cardioid microphones are designed to pick up things that are only relatively close to it, allowing for it to be used with relatively low interference.
Cardioid's in the Mandelbrot Set
The largest bulb of the Mandelbrot set is a cardioid, shown in black in this image. The Mandelbrot set is a fractal, so it exhibits the same pattern when viewed at any magnification. As a result, the set actually contains an infinite number of copies of the largest bulb, and the central bulb of any of these smaller copies is an approximate cardioid.
A cardioid is the caustic of a circle when a light source is on the circumference of the circle. We can see this in a conical cup partially filled with coffee. When a light is shining from a distance and at an angle equal to the angle of the cone, a cardioid will be visible on the surface of the liquid.
A metal ring can also be used to create a cardioid, as in the main image on this page. When light is reflected onto the inner side of the cylinder before being focused onto the table, a cardioid caustic will appear on the table.
- There are currently no teaching materials for this page. Add teaching materials.
Future Directions for this Page
This page was created by Liza, worked on by Becky, and still needs some changes:
- Work on the more mathematical section:
- The generating a cardioid using other shapes section still needs a lot of work. Becky made all the pictures for this section using the website http://xahlee.org/SpecialPlaneCurves_dir/Cardioid_dir/cardioid.html as a starting point.
- Specifically, the caustic section is probably the most confusing. We're still unsure as to what exactly makes the cardioid get formed by light rays. The images in this section (there are two right next to each other-- the black one and the one with the metal ring on the table) need explanations that are more clear. The issue is that the one of the metal ring is computer generated and we don't know where the light source was positioned.
- Equation of a cardioid section
- Equations should be numbered
- Prove/derive the polar equations for a cardioid
- Why it's interesting
- Cardioid microphone section is still confusing
- The wikipedia page on cardioids says that the image of any circle through the origin under the map z -> z^2 is a cardioid. Someone could expand on this idea and write a section on this.
Leave a message on the discussion page by clicking the 'discussion' tab at the top of this image page.